PWD Stebel Horn Mounting Kit DL650|Pat Walsh Designs

PWD Stebel Horn Mounting Kit - V-Strom DL650
With Air Intake Assembly and 2-way Locking Bolt

Includes:

• (1) CNC laser cut and bent 1/8" aluminum mounting bracket with tumbled finish
• (1) 10mm flange head motor mount bolt
• (1) 2-way locking bolt with lock nut (replaces the bolt supplied by Stebel)
• (1) 28" Intake air hose assmebly (heat and chemical resistant)
• (4) 8" zip ties for securing air tubing
• (1) Complete installation instructions with color photos
• Stebel horn and wiring harness not included

Use this kit to securely install a Stebel Compact Nautilus motorcycle air horn to your DL650.  The bracket easily mounts into the unused motor mount on the left side of the motor.  The horn is positioned verticaly near the stock horn for optimum sound performance and ease of installation. 

The bolt supplied with the Stebel horn is not adequate for the rigors of dual-sport riding so we've added a custom-machined 2-way locking bolt and lock nut.  This provides an extra level of security ensuring that the horn stays puts.

These horns operate using a small but powerful air compressor.  The enemy to this compressor is water and dirt.  To prevent your horn from dying an early death, we also include an Air Intake Assembly.  Simply attach the assembly to the connector that came with the horn and route the tubing to a location on the bike which will allow the compressor to suck in clean and dry air.  (Requires the air intake connector that comes with the Stebel horn)

Stebel horns are used on thousands of motorcycles all over the world and most of them are mounted on the outside of the bike rather than under a fairing.  As long as these horns are properly installed, they perform reliably even when exposed to the elements.  In addition to proper wiring, there are 2 simple keys to these horns lasting a long time: (1) Mount the horn as close to vertical as possible (2) Prevent water and dirt from getting sucked into the air compressor.  By using our mounting system, your Stebel horn will function reliably for years.

Crash Bar Compatibility Notes:  This kit will work with the Pat Walsh Crash bars and the GIVI crash bars.  The fit is tight with the GIVI bars--but it does fit.  We have not yet tested the kit with other crash bars.

We do not guarantee compatibility with horns other than current model genuine Stebel horns made in Italy.  Our 2-way mounting bolt will not fit older Stebel horns or the Chinese-made Stebel knock-off.